Thursday 10 November 2011

Motore V7 nuovo





Don't think it can be said it's a thing of beauty but it's good to see that Guzzi is 'developing' its motors. A change from twin to a single injector could be a good thing...we'd have to ride it and compare it to the V7 Classic and Cafe'/Racer models. Technical blurb below. What happened to the Scrambler though??



- For the first time in years, the “small-block” Moto Guzzi V-Twin has been extensively refurbished to produce more-adequate power and torque. The internal changes are immediately apparent via the engine’s largely revised exterior. New valve covers and, most important, vastly extended finning on heads and cylinders improve cooling in response to an increase in compression from 9.2:1 to 10.2:1.

Since the V7 engine uses a Heron- type combustion chamber, new pistons were adopted featuring a revised design on their dished-out crowns. The pistons also are lighter and stronger. In addition, the V7 now breathes through larger valves and a revised induction system that uses a single Y-shaped 38mm throttle body that splits into two 36mm runners where the individual injectors are located.

As a result of these changes, claimed output has increased to 51 horsepower at 6200 rpm and 42.8 foot-pounds of torque at 5000 rpm. Throttle response from low revs is vastly improved, thanks to the ram effect of the aforementioned longer manifold and cooler air inhaled by the relocated airbox.

The upgraded 750cc Twin powers three models: V7, V7 Special and V7 Racer. All three machines are based on the previous version but feature new graphics. The rolling gear remains unchanged, but the overall quality of the bikes shows some meaningful improvements.

1 comment:

Steven Salemi said...

Hey, I think this motor looks pretty good! All the right Guzzi visual cues, high-tech design...all cool with me. The only thing I hate is the damned cheesy plastic alternator (cam?) cover. Very chintzy-looking.

But this is a personal bee in my bonnet, stemming from the days when I used to buy serial BMW R1200cruisers. These bikes also came with plastic covers, and I'd have to buy the really nice but very costly $300+ BMW Factory Chrome Alternator Cover. After a few bikes, these were bankrupting me. And I got tired of putting them on.

I saw a like item, a fancy cover, for a Guzzi once, but apparently they stopped making them.

Viva Guzzi. I hope they outlast Italy itself!